Installation / Handling - Ingersoll-Rand IRN 7.5/5.5 kW Operation And Maintenance Manual

KEY
7.5−15HP 80 GALLON
A Air inlet
B 1/4" (6mm) electric drain valve
C Green power on light
D On/off selector switch
E Air exhaust
F Pressure / maintenance indicator
G Emergency stop button
H Receiver size Ø620.0 x 1168.4 LG [Ø24.40 x 46.00]
I 3/4" (19mm) N.P.T. ball valve
J Electric drain valve port location
K 4 x 17,5 [0.68] x 44.5 [1.75] slot
L Coolant separator element
M Coolant filter
N Air inlet filter
O Motor drive configuration port
P Variable speed adjustment
Q Variable / fixed speed toggle switch
http://air.irco.com

INSTALLATION / HANDLING

R Coolant fill
S Coolant level sight glass
T Coolant drain
U Dewpoint indicator
V Airend relief valve
W Package lifting points
X EDV power cord location
Y Receiver relief valve
Z Package cooling fan (direction of rotaion is to be clockwise when
viewed from this side)
AA Ø25.4 [1.00] Incoming power connections for compressor and
dryer.
AB Electrical controls/fuses access panel
AC Rotation
AD 0.25 inch discharge port (EDV)
Center of gravity
13
IRN 7.5 − 15 HP (5.5 − 11 kW)