Scan List; The Mode To Start Scan - AnyTone AT-D868 User Manual

BASIC OPERATIONS

Scan List

Each scan list respect one scan mode, this transceiver support 250 scan lists, each scan list can
support 32 channels. The user can add desired scan list for this transceiver through program
software, and distribute different scan list for each channel.

The Mode To Start Scan

This transceiver has below two modes to start scan:
(1) Start scan by manual: Under standby conditions, press programmed "scan on/off" key, the
transceiver will start scan after the transceiver announce, the red LED and green LED will twinkle
at same time. The transceiver will stay at current channel when it scans matching signal, the green
LED will be lighting, then you can hear the call from transmitter, the transceiver will transmit at
preprogrammed "specify transmit channel" when press PTT key. Under scan condition to press
programmed "scan on/off" key, the transceiver will exit scan after it announce.
(2) Start scan automatically: Under standby conditions, turn the channel selector knob to
programmed "Auto scan" channel, the transceiver will start scan, the red LED and green LED will
twinkle at same time. The transceiver will stay at current channel when it scans matching signal, the
green LED will be lighting, then you can hear the call from transmitter, the transceiver will transmit
at preprogrammed "specify transmit channel" when press PTT key. Under scan condition to press
programmed " scan on/off" key or turn the channel selector knob to other channels without "Auto
Scan" setup, the transceiver will exit scan.
17
Professional
FM Transceiver