Group Selection; Receiving; Transmitting - AnyTone AT-D868 User Manual

BASIC OPERATIONS

Group Selection

There are 32 channels in total which are divided into 2 groups with 16 channels in each group.
Under the standby condition, press programmed "Group Switch" key, the transceiver will emit
reminding tone, and then announce current channel number after group switch.
NOTE: Program the channels in PC software and assign the channel to desired group. Press
programmed "Group Switch" key to switch between Group 1 and Group 2, transceiver emits "DU
DU" beep means Group 2, "DU" beep means Group 1.

Receiving

You can hear the transmitting party's calling when the channel you are operating is called and the
LED light turns green. User can adjust the call volume accurately by turn the channels selector knob.
NOTE:You may not receive the calling if you set a high squelch level of the transceiver. If current
channel has been programmed with signaling or ID, you can only hear the call from a same signaling or
code, other calls can not be heard.

Transmitting

Press the [PTT] key and speak into microphone. Please keep around 2.5-5cm distance between
microphone and your lip. And please speak in normal tone to make the receiver obtain best tone
quality.
14
Professional
FM Transceiver