Alarm Operation; Activating An Alarm; Acoustic Location Signal; Testing The Alarm - Avaya 3735 User Manual

Menu operation
2. Select Profiles.
3. Select the profile that you want to edit, and then press More.
4. Select Edit.
5. Do one of the following:
• Edit the setting by marking it and then press Edit.
• Add additional settings by pressing More, and then selecting Add setting or Import
from.
• Remove a setting by marking it and then selecting More and then Remove setting.

Alarm operation

The support for the system dependent features are dependent on the model of the handset used.
If a shared phone is used, it must be logged in to the system to be able to send an alarm.

Activating an alarm

About this task
You can always trigger the alarm when you are speaking, editing your settings, or while the
handset is locked.
Procedure
To activate the alarm, press the alarm button twice within two seconds.
User can set a parameter through the WinPDM or Device Manager.
The system displays an information text Personal alarm.
The alarm is sent to the alarm server that distributes it further. After that the handset returns to
stand-by mode.

Acoustic location signal

An alarm can be followed by an Acoustic Location Signal (ALS). The ALS is a signal from the
handset that sounds for a predefined period of time. The signal is silenced by pressing the Mute
button on the handset.

Testing the alarm

Procedure
Press and hold the alarm button until the system displays the information text Test Alarm.
August 2019 Using 3735 DECT handsets with Communication Manager and IP Office
Comments on this document? infodev@avaya.com
98