Dialing a number with the headset button
Procedure
If a headset is used, use the Headset button to obtain a dial tone and dial the last number.
Ensure that the headset is configured using the WinPDM or Device Manager.
Dialing using a pre-programmed number
About this task
You can programme the following with a handset number:
• Navigation keys
• Hot keys
• Soft keys
• Multifunction button
A Headset button can also be programmed with a handset number as long as it has been
configured by the administrator via the WinPDM or Device Manager.
Procedure
To dial a pre-programmed number, press the pre-programmed key or button.
The call is connected automatically.
Dialing a number from the call list
About this task
Use this procedure to dial a number from the call list when the handset is in the idle mode.
Procedure
1. Press Menu.
2. Select Calls.
3. Select Call list, and then select a number.
The system displays the call list that you can scroll using the navigation key up and down.
4. Press Call or the Off-hook (
August 2019
) key to dial the selected number.
Using 3735 DECT handsets with Communication Manager and IP Office
Comments on this document? infodev@avaya.com
Managing outgoing calls
77