Table of Contents
Advertisement
Available languages
Available languages
Support
On the Web www.dct-delta.de you can
get new Software updates for your
Receiver under the link Services.
With
the
Software
program
ALL
UPDATER you are able to communicate
with PC to Receiver over the serial bus
(RS232) to load your Receiver with the
new Software update and new channel
list.
If you have downloaded the necessary
Software update (*.wsw) or channel list
(*.wdb) you can extract it with your
Packer program, for example Winrar.
Now connect your PC with the Receiver.
Attention:
Be sure, that the Receiver is not
connected with the Power supply!
After that you can start ALL UPDATER
and load the downloaded Software
update (*.wsw) or channelist (*.wdb).
Click the switch box Update and the PC
started to connect.
Now you can put the Receiver on the
Power supply.
After that the Softwareupdate starts to
upload and you have the newest Update
Software version for your Receiver. To
upload the channelist you have to
switch to the menu database upgrade
and set it on "receive" (press "OK" to
wait) and send the channellist to the
receiver.
www.dct-delta.de
65
25.01.2007
Advertisement
Chapters
Table of Contents
