Delta SDR 510 U Manual page 41

Front/Rear Panel
7 10
6 8
5 9
1 2 3 4
1. IF INPUT: Use to connect a LNB/Satellite Dish.
2. IF OUTPUT: Use it when connecting to another receiver.
3. ANT IN: Use to connect a terrestrial antenna or cable TV signal.
4. TV OUT: Use to connect a RF signal from this receiver to RF (ANT) input jack on TV.
5. DIGITAL AUDIO OUTPUT: S/PDIF output
6 VIDEO/AUDIO OUTPUT: Video/Audio signal from your receiver to VCR,
TV, or to external audio equipment
7. TV SCART: For the video/audio input of the TV.
8. VCR SCART: For the video/audio input/output of the VCR.
9. RS-232C: Use it when connecting to your PC.
10. Power ON/OFF: To switch between ON/OFF to the Power supply.
www.dct-delta.de 41 25.01.2007