Table of Contents
Advertisement
Available languages
Available languages
Main Menu
1.1.1 EDIT
Sat. Name: Select the name of the
satellite.
See the Sat list by pressing the OK button.
LNB power: Turn on/off the LNB Power.
LNB Type: from various LNB-types you
can select the right one. Press button ◄ or
►, to run over the list (Single, Universal
Unicable, OSC).
1 Unicable: this option enables you to run
a
Satellite-System
Technology. Choose a Satellite and press
the OK button and then the button ► to
enter the parameters. After that press the
OK button to go to the Unicable settings.
There you can enter an IF-Frequency and
IF-Channel. The following properties are
used
with
the
SAT-Channel-Converter
SUM928 and are very important to know.
Each Frequency is dedicated with only one
Channel.
IF-Frequency in MHz
(for SUM928)
1284
1400
1516
1632
1748
1864
1980
2096
The IF-Frequency of 1284MHz is dedicated
to IF-Channel 1 and the IF-Frequency of
2096MHz is dedicated to IF-Channel 8.
By using a second Satellite you have to
make the same properties.
Example: Satellite A is associated with an
IF-Frequency of 1400MHz and IF-Channel
2.
www.dct-delta.de
with
Unicable-
IF-Channel
1
2
3
4
5
6
7
8
48
25.01.2007
Advertisement
Chapters
Table of Contents
