Receiver Connection - Delta SDR 510 U Manual

Receiver Connection

Various equipment (TV/VCR) can be connected to this receiver.
This manual will explain common ways to connect to the equipment.
If you are using a RF cable, please synchronize the RF channels of the
TV set and of the VCR.
If you experience any problem, please contact your sales agency.
1. How to connect the receiver to a TV set
• Connect one end of the SCART cable to the TV SCART socket on the back of the receiver
and the other end to the SCART input socket on your TV.
• Connect the LNB[Dish] cable to the IF input connector of receiver.
• If you want to use an RF cable, connect one end of a RF cable to the TV-OUT connector on
the receiver and the other end to the RF IN connector on your TV.
• Connect your TV Arial cable to the ANT IN connector on the receiver for receiving terrestrial
or cable channels.
2. How to connect the TV and VCR
• Connect one SCART cable between the TV and the TV SCART socket on the receiver.
• Connect the other SCART cable between the VCR and the VIDEO SCART on the receiver.
• Connect one end of an RF cable to the TV OUT connector on the receiver and the other
end to the RF IN connector on your VCR.
• Connect one end of a RF lead to the RF OUT connector on your VCR and the other end to
the RF IN connector on your TV.
• Connect your TV antenna to the ANT IN connector on the receiver for receiving terrestrial or
cable channels.
• Connect IF input connector of the receiver and antenna.
www.dct-delta.de 42 25.01.2007