Delta SDR 510 U Manual page 49

Main Menu
As a result Satellite B is dedicated with an
IF-Frequency of 1400MHz with Channel 2
too.
The Unicable property from Satellite B has
to be identical with Satellite A. Choose Exit
and save the properties with the RED-Key.
Please see the user manual of the
multiswitch or LNB you are using, to find
the right parameter.
LNB Frequency: LNB Frequency value
can be selected by using the ◄, ► buttons
and Enter a proper value by using numeric
buttons(0~9).
22 KHz: Select 22 KHz On/off/Auto to
control and external tone switch.
DiSEqC: DiSEqC must be used when
using two or more antennas and LNBs.
Select None, DiSEqC 1.0, DiSEqC 1.1,
MOTOR and USALS.
● When selecting "MOTOR" Yellow
Color button.
1) DiSEqC 1.2 Motor : You can move the
motor to the left or right by pressing the
◄,► keys continuously, but when you stop
pressing the ◄, ► keys, the motor will be
stopped.
2) Save: When you press the OK key,
current position of the DiSEqC motor will
be saved.
3) Go to Reference: Move to the position
0.
www.dct-delta.de 49 25.01.2007