Transponder - Delta SDR 510 U Manual

Main Menu

1.1.4 TRANSPONDER

It will be more convenient to use this procedure
when you want to search the channels for a
specified transponder offered from the satellite.
Select any transponder that you want to change
the setting parameters or scan, by using ▲, ▼
keys. You can
simultaneously by
consecutively.
1) EDIT: Press the RED key to change the
parameter values of the selected transponder.
Place the cursor on the sub menu by using
the ▲, ▼ keys and Press the ◄, ► or
NUMERIC button to change the setting.
2) ADD: If you cannot find the desired
transponder from the transponder list, you add
it by inputting appropriate parameter values for
a new transponder. When you want to change
the parameter
transponder, select the parameter using the ▲,
▼ keys and change its value by using the ◄, ►
or NUMERIC keys.
3) SCAN: This option will enable you to search
channels broadcasted
transponder using its predefined information.
Select the transponder from transponder list
which you want to search, by using the ▲,▼
keys. You can
transponders simultaneously by pressing the
OK key consecutively, and then the selected
transponders will be highlighted. If you cannot
find it from the transponder list, you should
insert all the setting parameters.
4) DELETE: Press the BLUE key to delete
the selected transponders.
www.dct-delta.de
also select numerous
pressing the OK
of an existing
over a specific
also select numerous
53
key
25.01.2007