Rename; Scan - Delta SDR 510 U Manual

Main Menu

1.1.2 RENAME

Select the satellite name you would like to
rename and press the OK button. By
using the BACK buttons, Move to be
previous menu. Press GREEN button to
save.

1.1.3 SCAN

You can select the satellite you want to
scan by using the ▲,▼ keys. You can also
select numerous satellites simultaneously
by pressing the OK key consecutively, and
then the selected satellites will be
highlighted.
Network: If you want to have all other
transponder information, you need to select
network on.
Search Mode: You can select All / FTA
option mode in each satellite by using the
◄, ► keys.
All: scan all channels,
FTA: skip all scrambled channels.
Press the OK key and Scan will begin.
STB will automatically search all TV/Radio
channels from a satellite and save them
into the channel list.
You can see the progressive status of
channel searching. Press the RED or EXIT
key to stop channel Search. When the
Channel Search is completed, the result
will be saved and the first channel of the
searched ones will be displayed.
www.dct-delta.de 52 25.01.2007