Quadra-Fire Pioneer-III-ABK Owner's Manual page 21

Front
Stack
Figure 3.24 Stacking Wood
Front
Stack
Figure 3.245Stacking Wood
• After about 5 minutes, close and latch the door
completely then push the SBT button again. See
Figure 3.28.
Maximum Heat
Setting the thermostat at a temperature above what the
room will achieve, for example, 90 ° on the thermostat
will cause the appliance to burn continuously on high.
Press the activation button to activate the system and
load fuel.
Medium Burn
• When away during daytime hours and unattended set
the thermostat to a temperature below what the room
temperature will drop to, for example, 45° and then
program the thermostat to turn back on to a higher
desired temperature (example 75°) after 13 hours. Time
will vary depending on house size. Load fireplace by
referring to the High Burn section.
Back
Stack
Air Gap Between
Stacks
Back
Stack
Air Gap Between
Stacks
Quadra-Fire • Pioneer III Owner's Manual • 4182-900 • Rev D • 08/19
Figure 3.26 Door Open 1-2 Inches
Figure 3.27 Door Latched Lightly
Figure 3.28 Door Fully Closed
21