Installing The Coin-Cell Battery - Dell Inspiron 5590 Service Manual

About this task
The following image indicates the location of the coin-cell battery and provides a visual representation of the removal procedure.
Steps
1. Disconnect the speaker cable from the system board.
2. Peel off the tape that secures the speaker cable to the system board.
3. Note the speaker-cable routing and remove the speaker cable from the routing guides.
4. Disconnect the coin-cell battery cable from the system board.
5. Remove the coin-cell battery cable from the routing guides.
NOTE: Depending on the configuration ordered, you may need to peel-off additional tape that adheres the coin-cell
battery cable to the palm-rest and keyboard assembly. You may also need to temporarily remove the speaker cable,
which routes through the same guides.
6. Pry the coin-cell battery off the palm-rest and keyboard assembly.

Installing the coin-cell battery

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the coin-cell battery and provides a visual representation of the installation procedure.
Removing and installing components 47