Table of Contents
Advertisement
Installing the power-adapter port
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of power-adapter port and provides a visual representation of the installation procedure.
Steps
1. Place the power-adapter port into the slot on the palm-rest and keyboard assembly.
2. Replace the screw (M2x3) that secures the power-adapter port to the palm-rest and keyboard assembly.
3. Connect the power-adapter cable to the connector on the system board.
Next steps
1. Install the
display
assembly.
2. Install the battery.
3. Install the
base
cover.
4. Follow the procedure in
Power button
52
Removing and installing components
After working inside your
computer.
Hide quick links:
Advertisement
Table of Contents
