Dell Inspiron 5590 Service Manual page 73

Table 13. System setup options—POST Behavior menu
POST Behavior
Enable Adapter Warnings
Fastboot
Extend BIOS POST Time
Full Screen Logo
Numlock Enable
Numlock Enable
Fn Lock
Lock Mode
Warnings and Errors
Table 14. System setup options—Virtualization menu
Virtualization
Intel Virtualization Technology
Enable Intel Virtualization Technology (VT)
VT for Direct I/O
Table 15. System setup options—Maintenance menu
Maintenance
Asset Tag
Asset Tag
Service Tag
Enables the computer to display adapter warning messages during boot.
Default: ON
Configures the speed of the UEFI boot process.
Default: Thorough. Performs complete hardware and configuration initialization during
boot.
Configures the BIOS POST (Power-On Self-Test) load time.
Default: 0 seconds
Enabled or disabled the computer to display full screen logo if the image match
screen resolution.
Default: OFF
Enables or disables Numlock when the computer boots.
Default: ON
Enables or disables the Fn lock mode.
Default: ON
Default: Lock Mode Secondary. Lock Mode Secondary = If this option is selected, the
F1-F12 keys scan the code for their secondary functions.
Selects an action on encountering a warning or error during boot.
Default: Prompt on Warnings and Errors. Stop, prompt and wait for user input when
warnings or errors are detected.
NOTE: Errors deemed critical to the operation of the computer hardware
will always halt the computer.
Enables or disables the computer to run a virtual machine monitor (VMM).
Default: ON
Enables the computer to perform Virtualization Technology for Direct I/O (VT-d).
VT-d is an Intel method that provides virtualization for memory map I/O.
Default: ON
Creates a system Asset Tag that can be used by an IT administrator to uniquely
identify a particular system. Once set in BIOS, the Asset Tag cannot be changed.
Displays the Service Tag of the computer.
System setup 73