Dell Inspiron 5590 Service Manual page 72

Table 11. System setup options—Power Management menu
Power Management
Wake on AC
Enable USB Wake Support
Wake on Dell USB-C Dock
Auto On Time
Block Sleep
Battery Charge Configuration
Enable Advanced Battery Charge
Configuration
Enable Intel Speed Shift Technology
Lid Behavior
System input while lid closed (Keyboard,
Touchpad)
Power On Lid Open
Table 12. System setup options—Wireless menu
Wireless
Wireless Device Enable
WLAN
Bluetooth
72 System setup
Enables the computer to turn on and go to boot when AC power is supplied to the
computer.
Default: OFF
Enables the USB devices to wake the computer from Standby mode.
Default: OFF
Enables the computer to wake from Standby when it is connected to a Dell USB-C
dock.
Default: ON
Enables the computer to automatically power on for defined days and times.
Default: Disabled. The system will not automatically power up.
Blocks the computer from entering Sleep (S3) mode in the operating system.
Default: OFF
NOTE: If enabled, the computer will not go to sleep, Intel Rapid Start will
be disabled automatically, and the operating system power option will be
blank if it was set to Sleep.
Enables the computer to run on battery during power usage hours. Use the below
options to prevent AC power usage between certain times of each day.
Default: Adaptive. Battery settings are adaptively optimized based on your typical
battery usage pattern.
Enables Advanced Battery Charge Configuration from the beginning of the day to a
specified work period. Advanced Battery Charged maximizes battery health while still
supporting heavy use during the work day.
Default: OFF
Enables or disables Intel Speed Shift Technology support which enables the operating
system to select the appropriate processor performance automatically.
Default: ON
Enables or disables system input while the lid is closed (to prevent accidental input
from the keyboard or the touchpad when the lid is closed).
Default: OFF
Enables the computer to power up from the off state whenever the lid is opened.
Default: ON
Enables or disables internal WLAN/Bluetooth devices.
Default: ON
Default: ON