Assembly; Operation - Wolf Garten LI-ION POWER HSA 45 V Instruction Manual

WOLF Garten would like to en-
courage environmentally
friendly consumer attitudes.
Working together with you and
WOLF dealers we guarantee
the acceptance and recycling
of used batteries.

Assembly

Attach protective shield
Attach the protective shield as shown.

Operation

Times of operation
Please consult regional/local regulations.
Inquire about the operating times at your local
regulatory agency.
Charging
B
1
Caution! The charger must only be oper-
ated in dry rooms.
Before using the shears for the first time, charge
the battery for approx. 4 hours.
Recharge only with the original WOLF charger
(part no. 7420 061) !
1. Remove the battery from the hedge shears
C
.
2. Connect the charger to the power mains
(1).
3. Insert the battery into the adapter of the charg-
B
3 er (2).
Instructions for the handling of the
B
charger :
Yellow LED (3) is on: Connection to
mains power only
Red LED (3) is on: Battery is being
charged
G
A
B
Disposal
Power tools do not belong in
household garbage. Bring the the
device, accessories and packaging
to an environmentally-friendly recy-
cling location.
Green LED (3) is on: Charge process
completed
Green LED (3) flashing: Battery defec-
tive
3
General instructions regarding the bat-
tery:
In order to maintain the long service life of
the battery, always follow the instructions
below:
The hedge shears are automatically
switched off when the battery voltage is
low. The battery must then be recharged
before the shears can be used again.
Always recharge the lithium-ion battery
prior to any prolonged period of non-use,
i.e. before storing the shears away in au-
tumn.
The charging time is 4 hours for a battery
that is completely empty.
The lithium-ion rechargeable battery can
be charged at any charge level and
charging can be interrupted at any time
without damaging the battery (no memo-
ry effect)
15