Maintenance; Recommended Maintenance Schedule(S); Maintenance Safety - Toro ProCore 864 Operator's Manual

Maintenance

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 8 hours
Before each use or daily
Every 50 hours
Every 100 hours
Every 250 hours
Every 500 hours
Before storage
Yearly

Maintenance Safety

•
Before adjusting, cleaning, servicing, or leaving
the machine, do the following:
– Position the machine on a level surface.
– Move the throttle switch to the low-idle position.
– Disengage the PTO.
– Ensure that the traction is in neutral.
– Engage the parking brake.
– Shut off the engine of the traction unit and
remove the key.
– Wait for all moving parts to stop.
– Allow machine components to cool before
performing maintenance.
•
Perform only those maintenance instructions
described in this manual. If major repairs are
ever needed or assistance is desired, contact an
authorized Toro distributor.
•
Ensure that the machine is in safe operating
condition by keeping nuts, bolts, and screws tight.
•
If possible, do not perform maintenance while the
engine is running. Keep away from moving parts.
•
Do not check or adjust the chain tension when the
traction unit engine is running.
•
Carefully release pressure from components with
stored energy.
Maintenance Procedure
• Change the gearbox lubrication.
• Check the torque of the coring head fasteners.
• Check the belt tension.
• Check the belt tension.
• Grease the bearings and bushings.
• Inspect the bearings.
• Check the gearbox lubrication.
• Change the gearbox lubrication.
• Check the torque of the coring head fasteners.
• Inspect and replace the bearings as needed.
• Perform all 50-hour maintenance procedures.
• Paint areas that are scratched, chipped, or rusted.
• Remove and clean the tines.
• Remove all debris.
• Inspect the belts.
•
Support the machine with blocks or storage stands
when working beneath it. Never rely on the
hydraulic system to support the machine.
•
Check the tine mounting bolts daily to be sure that
they are tightened to specification.
•
Ensure that all guards are installed and the hood
is secured shut after maintaining or adjusting the
machine.
•
To ensure safe, optimal performance of the
machine, use only genuine Toro replacement
parts. Replacement parts made by other
manufacturers could be dangerous, and such use
could void the product warranty.
28