Safety; General Safety; Safety And Instructional Decals - Toro ProCore 864 Operator's Manual

Safety

General Safety

This product is capable of amputating hands and
feet and of throwing objects. Always follow all safety
instructions to avoid serious personal injury.
Using this product for purposes other than its intended
use could prove dangerous to you and bystanders.
•
Read and understand the contents of this
Operator's Manual before using the machine.
•
Do not put your hands or feet near moving
components of the machine.
•
Do not operate the machine without all guards
and other safety protective devices in place and
functioning properly on the machine.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. Stored energy hazard—read the Operator's Manual.
1. Read the Operator's Manual.
93–6696
110-4665
•
Keep clear of any discharge opening. Keep
bystanders and pets a safe distance away from
the machine.
•
Keep bystanders and children out of the operating
area. Never allow children to operate the machine.
•
Always shut off the engine of the traction unit,
remove the key (if equipped), wait for all moving
parts to stop, and allow the machine to cool
before adjusting, servicing, cleaning, or storing
the machine.
Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always
pay attention to the safety-alert symbol
means Caution, Warning, or Danger—personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.
decal93-6696
decal110-4665
1. Install the posts in the
stand to the holes in the
frame.
4
, which
110-4666
2. Use pins to secure the
frame to the stand.
decal110-4666