Product Overview; Controls; Specifications; Attachments/Accessories - Toro ProCore 864 Operator's Manual

Product Overview

Controls

Depth Adjuster
Rotate the depth adjuster input shaft clockwise to
reduce the aeration depth or counterclockwise to
increase the aeration depth
Figure 21
1. Depth adjuster input shaft
2. Locking plate
Note:
17 revolutions of the depth adjuster equal
approximately 6.4 mm (1/4 inch) depth change.
(Figure 21).
g007304
3. Depth indicator decal
4. Depth alignment mark

Specifications

Note:
Specifications and design are subject to
change without notice.
ProCore 864 Aerator
Working Width
Overall Width
Overall Length
Overall Height
Weight
ProCore 1298 Aerator
Working Width
Overall Width
Overall Length
Overall Height
Weight

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
17
163 cm (64 inches)
170 cm (67 inches)
89 cm (35 inches)
98 cm (38.5 inches)
714 kg (1,575 lb)
249 cm (98 inches)
257 cm (101 inches)
89 cm (35 inches)
98 cm (38.5 inches)
1043 kg (2,300 lb)