IBM 7316-TF4 Manual page 65

7. Connect power to the display.
8. Fully extend the console unit from the front of the rack, and then neatly route the cables within the
rack and secure them with cable straps along the way.
Important: If you have excess video cable, do not coil it as shown in the following illustration.
To minimize the electrical interference if you have excess video cable, arrange the cable in figure-eight
loops, as shown in the following illustration. Secure the cable in the middle with a cable tie or strap.
Cable tie
Installing the 7316-TF4 18.5-Inch Flat Panel Rack-Mounted monitor and keyboard
49