Installing The Console Unit In The Rack - IBM 7316-TF4 Manual

b. Press the rear slide-rail bracket towards the rack flange and then pull it towards the front of the
rack until the locking bracket clicks into place behind the rack flange.
c. Extend the slide-rail and press the front slide-rail bracket towards the rack flange and then push it
towards the rear of the rack until the locking bracket clicks into place behind the rack flange.
Slide-rail front
d. Repeat steps 4a to 4c to attach the other outer slide-rail.

Installing the console unit in the rack

Learn how to install the console unit in the rack.
To install the console unit in the rack, complete the following steps:
1. Extend the inner part of the outer slide-rails and slide them forward to the front of the outer rails.
Carefully slide the rollers on the console unit into the notch in the slide-rails as shown in the
illustration.
46
Power Systems: 7316-TF4 18.5-Inch Flat Panel Rack-Mounted Monitor and Keyboard
Slide-rail rear