Replacing The Console Unit; Removing The Console Unit From The Rack - IBM 7316-TF4 Manual

18.5-inch flat panel rack-mounted monitor and keyboard
Hide thumbs Also See for 7316-TF4:
Table of Contents

Advertisement

Rear
12. Go to Installing the console unit in the rack for instructions for reinstalling the console unit in the
rack, and then install any other devices that you removed from the rack.

Replacing the console unit

This topic collection provides the information on how to replace the console unit.
The procedures that are provided in this section to replace the console unit in the rack consist of the
following tasks:
1. Removing the existing console unit from the rack
2. Moving the keyboard from the existing console unit to the replacement console unit
3. Removing and replacing the outer slide-rails
Note: The replacement console unit comes with inner slide-rails attached. To make sure that the
slide-rail assemblies fit correctly, replace the existing outer slide-rails with the new rails that come
with the replacement console unit.
4. Installing the replacement console unit in the rack.
Removing the rack doors and side panels might make removal of the existing console unit and
installation of the replacement easier. See the documentation that comes with the rack for additional
information.

Removing the console unit from the rack

Learn how to remove the console unit from the rack.
To remove the console unit from the rack, complete the following steps:
1. If a console switch is installed behind the console unit, remove the console switch from the rack.
2. Turn off the display and disconnect the power cord from the short jumper cord on the
cable-management arm from the electrical outlet or power distribution unit (PDU). Disconnect from
the server or console switch any cables that are connected to the console unit (keyboard-and-mouse,
video, and power cables).
3. Close the flat-panel display.
4. Remove the console unit from the rack:
a. Remove the thumbscrew that attaches the cable-management arm to the outer slide-rail bracket.
Slide the C-channel on the cable-management arm completely away from the bracket on the
40
Power Systems: 7316-TF4 18.5-Inch Flat Panel Rack-Mounted Monitor and Keyboard
Front

Advertisement

Table of Contents
loading

Table of Contents