IBM 7316-TF4 Manual page 54

Repeat step 7 and step 8 for the other outer slide-rail.
9. Remove the shipping screw from each new outer slide-rail.
Slide-rail rear
Shipping screw
10. To attach the outer slide-rail to the rack, complete the following steps.
Note: Install the rear slide-rail bracket to the rear of the rack first; then, install the front slide-rail
bracket to the front of the rack.
a. Holding the slide-rail horizontally, align the rear slide-rail bracket so that the bracket is on the
outside of the rack mounting flanges.
38
Power Systems: 7316-TF4 18.5-Inch Flat Panel Rack-Mounted Monitor and Keyboard
1
2
Shipping screw
Slide-rail front