Table of Contents
Advertisement
14 Configuration of the web server
14.3.1.1 Virtual Inputs (vChannel)
In the virtual inputs area, the settings can be made for connecting IP components.
(e.g. PIR IP camera, IP alarm module).
As in the wireless inputs area, the virtual inputs can be concealed, the internal
activation configured, as well as the event connected to the alarm.
In addition, the following – virtual IP-zone specific settings – can be configured:
1.
Type: select which IP components in the virtual zone should be trained.
PIR IP camera = TVIP41550
IP zone 1 = IP alarm module – input zone 1
IP zone 2 = IP alarm module – input zone 2
Only one IP alarm module can be trained for each alarm centre.
2.
Address: enter the IP address of the components connected here.
3.
User name: user name for accessing the connected component (here:
standard user name for the PIR IP camera = "root" / standard user name of
the IP alarm module = "admin"). For more details, refer to the user manual
of the connected component.
27
Advertisement
Table of Contents
