Motherboard Installation; Tools Needed; Location Of Mounting Holes - Supermicro X11SRA User Manual

Super X11SRA/-F/-RF User's Manual

2.2 Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Phillips Screwdriver (1)

Tools Needed

LEDBMC
A C
1 1
BT1
CPU M.2 PCI-E 3.0 x4
JL1
I-SATA3
I-SATA6~7 I-SATA4~5 I-SATA2~3

Location of Mounting Holes

Notes: 1. To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lb/inch on each mounting screw during motherboard installation.
2. Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to the
chassis.
Phillips Screws (9)
AUDIO_FP1
BMC
MH12
MH10
MH13
MH11
BAR CODE
SP1
J12 J13
A
A
C
C
CPU M.2 PCI-E 3.0 x4
DIMMC2
PCH
C422
DIMMC1
DIMMD2
DIMMD1
JNVME1
FAN3
PRESS FIT
I-SATA1
I-SATA2
USB 6/7(3.0)
HD AUDIO
LAN1
LAN2
USB 8/9(3.0)
USB 12/13(3.1)
CPU
LGA 2066
JTBT
LEDPWR
JPI2C1
JF1
FAN2
22
Standoffs (9)
Only if Needed
VGA
KB/MOUSE
USB 0/1
JNVI2C1
FAN4
DIMMB1
DIMMB2
DIMMA1
DIMMA2
BIOS LICENSE
FAN1
JPWR2