Super X11SRA/-F/-RF User's Manual
1.2 Processor and Chipset Overview
The X11SRA and X11SRA-F/-RF motherboards support a single Intel Xeon W-21xx series
processor in the LGA2066 socket. With the Intel C422 PCH, the X11SRA/-F/-RF is a high-
end, multi-GPU workstation motherboard that offers reliablity and stability. It offers the latest
high-performance features such as NVMe, M.2/U.2 storage interfaces, and DDR4 memory
with speeds of up to 2666MHz.
The X11SRA/-F/-RF supports the following features:
•
ACPI Power Management Logic Support Rev. 4.0a
•
Intel Turbo Boost Technology
•
Configurable TDP (cTDP) and Lower-Power Mode
•
Adaptive Thermal Management/Monitoring
•
PCI-E 3.0, SATA 3.0, NVMe, U.2 and M.2 connectors
•
System Management Bus (SMBus) Specification Version 2.0
•
Intel Trusted Execution Technology (Intel TXT)
•
Intel Rapid Storage Technology
•
Intel Virtualization Technology for Directed I/O (Intel VT-d)
1.3 Special Features
This section describes the health monitoring features of the X11SRA/-F/-RF motherboard.
The motherboard has an onboard System Hardware Monitor chip that supports system health
monitoring.
Recovery from AC Power Loss
The Basic I/O System (BIOS) provides a setting that determines how the system will respond
when AC power is lost and then restored to the system. You can choose for the system to
remain powered off (in which case you must press the power switch to turn it back on), or for
it to automatically return to the power-on state. Refer to the Advanced BIOS Setup section
for this setting. The default setting is Last State.
18