Dimm Installation; Dimm Removal - Supermicro X11SRA User Manual

Super X11SRA/-F/-RF User's Manual

DIMM Installation

1. Insert the desired number of DIMMs into
the memory slots, starting with DIMMA1,
DIMMB1, DIMMC1, DIMMD1, then DIMMA2,
DIMMB2, DIMMC2, DIMMD2. For best
performance, please use the memory
modules of the same type and speed.
2. Push the release tab outwards on the end of
the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Use two thumbs together to press the DIMM
module straight down into the slot until the
module snaps into place.
6. Push the release tab into the lock position
and secure the DIMM module into the slot.

DIMM Removal

Press the release tab on the end of the DIMM
module to unlock it. Once the DIMM module is
loosened, remove it from the memory slot.
BMC
LEDBMC
MH12
A C
MH10
MH11 MH13
1 1
BT1
J12 J13
A
C
CPU M.2 PCI-E 3.0 x4
CPU M.2 PCI-E 3.0 x4
PCH
C422
JNVME1
PRESS FIT
JL1
I-SATA3 I-SATA2 I-SATA1
I-SATA6~7 I-SATA4~5 I-SATA2~3
Release Tabs
Press the DIMM module
straight down into the
memory slot.
32
AUDIO_FP1
VGA
USB 6/7(3.0)
HD AUDIO
KB/MOUSE
LAN2 LAN1
USB 0/1
USB 8/9(3.0) USB 12/13(3.1)
JNVI2C1
FAN4
DIMMB1
DIMMB2
DIMMA1
DIMMA2
BAR CODE
SP1
CPU
LGA 2066
A
C
BIOS LICENSE
DIMMC2
DIMMC1
DIMMD2
DIMMD1
FAN3 FAN1
JTBT
LEDPWR JPWR2
JPI2C1
JF1
FAN2
Notches