Ipmi; System Event Log - Supermicro X11SRA User Manual

Super X11SRA/-F/-RF User Manual

4.5 IPMI

Use this feature to configure Intelligent Platform Management Interface (IPMI) settings.
BMC Firmware Revision
This feature indicates the IPMI firmware revision used in your system.
IPMI Status
This feature indicates the status of the IPMI firmware installed in your system.

System Event Log


Enabling/Disabling Options
SEL Components
Select Enabled for all system event logging at boot up. The options are Disabled and Enabled.
Erasing Settings
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot. Select Yes,
On every reset to erase all system event logs upon each system reboot. Select No to keep
all system event logs after each system reboot. The options are No, (Yes, On next reset),
and (Yes, On every reset).
When SEL is Full
This feature allows the user to decide what the BIOS should do when the system event log
is full. Select Erase Immediately to erase all events in the log when the system event log is
full. The options are Do Nothing and Erase Immediately.
90