Table of Contents
Advertisement
1-3
Server Chassis Features
The SuperServer 5013C-M8 is a 1U rackmount server platform designed
with some of today's most state-of-the-art features.
general outline of the main features of the SC813MS-300C chassis.
System Power
When configured as a SuperServer 5013C-M8, the SC813MS-300C chassis
includes a single 300W power supply.
SCSI Subsystem
The SC813MS-300C chassis was designed to support four SCSI hard drives. The
SCSI drives are hot-swappable units.
ported. Note: The operating system you use must have RAID support to
enable the hot-swap capability of the SCSI drives.
Control Panel
The SC813MS-300C's control panel provides important system monitoring
and control information.
disk drive activity and system overheat conditions. The control panel also
includes a main power button and a system reset button. The front of the
SC813MS-300C also includes a COM port and two USB serial ports for easy
access.
Rear I/O Panel
The SC813MS-300C is a 1U rackmount chassis. Its I/O panel provides one
PCI motherboard expansion slot, one COM port (another is internal), two
USB ports, a parallel (printer) port, PS/2 mouse and keyboard ports, a VGA
port and two Gb Ethernet ports. (See Figure 1-2.)
ATA/100 IDE drives are also sup-
LEDs indicate power on, network activity, hard
1-5
Chapter 1: Introduction
The following is a
Advertisement
Table of Contents
