Download Print this page

ResMed Lumis Series User Manual page 22

Hide thumbs Also See for Lumis Series:

Advertisement

Available languages

Available languages

Sound
Pressure level measured according to ISO 80601-2-70:2015 (CPAP mode):
SlimLine:
Standard:
SlimLine or Standard and humidification:
Power level measured according to ISO 80601-2-70:2015 (CPAP mode):
SlimLine:
Standard:
SlimLine or Standard and humidification:
Declared dual-number noise emission values in accordance with ISO 4871:1996.
Alarm volume settings
Low (nominal 54 dBA), Medium (nominal 60 dBA), High (nominal 73 dBA)
Physical - device and humidifier
Dimensions (H x W x D):
Air outlet (complies with ISO 5356-1:2004):
Weight (device and cleanable humidifier):
Housing construction:
Water capacity:
Cleanable humidifier - material:
Temperature
Maximum heater plate:
Cut-out:
Maximum gas temperature:
Air filter
Standard:
Hypoallergenic:
Aircraft use
ResMed confirms that device meets the Federal Aviation Administration (FAA) requirements (RTCA/DO-160, section 21,
category M) for all phases of air travel.
Wireless module
Technology used:
It is recommended that the device is a minimum distance of 2 cm from the body during operation. Not applicable to masks,
tubes or accessories
Declaration of Conformity (DoC to the R&TTE Directive)
ResMed declares that the Lumis device is in compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC. A copy of the declaration of conformity (DoC) can be found on www.ResMed.com/ProductSupport.
Operating pressure range
S, ST, T, PAC, iVAPS:
CPAP
Supplemental oxygen
Maximum flow:
20
27 dBA with uncertainty of 2 dBA
27 dBA with uncertainty of 2 dBA
30 dBA with uncertainty of 2 dBA
35 dBA with uncertainty of 2 dBA
35 dBA with uncertainty of 2 dBA
38 dBA with uncertainty of 2 dBA
116 mm x 255 mm x 150 mm
22 mm
1336 g
Flame retardant engineering thermoplastic
To maximum fill line 380 mL
Injection moulded plastic, stainless steel and silicone seal
68°C
74°C
≤ 41°C
Material: Polyester non woven fibre
Average arrestance: >75% for ~7 micron dust
Material: Acrylic and polypropylene fibres in a polypropylene
carrier
Efficiency: >98% for ~7-8 micron dust; >80% for ~0.5 micron
dust
2G GSM
2 to 30 cm H
O (2 to 30 hPa)
2
4 to 20 cm H
O (4 to 20 hPa)
2
15 L/min (S, ST, T, PAC, CPAP), 4 L/min (iVAPS)

Advertisement

loading

This manual is also suitable for:

Lumis 150 vpap st-a