Advertisement
Quick Links
The control panel and user interface
Nasal cannula
fitting
Alarm indicator
Power indicator
and button
Mute button
1
2
4
3
5
Inova Labs
3500 Comsouth Drive,
Suite 100
Austin, TX 78744 USA
ResMed.com
Display screen
8
1
2
3
6
4
5
6
7
7
8
Distributed by: See ResMed.com for ResMed locations worldwide. Activox, LifeChoice and PULSE-WAVE are trademarks and/
or registered trademarks of the ResMed family of companies. For patent information, see ResMed.com/ip. Product availability
may vary across regions. Specifications may change without notice. © 2017 ResMed Ltd. 1019963/1 2017-06
Message field (alarm text)
External power symbol
Setting level
PULSE-WAVE breath detection
symbol
Auto Mode settings
Operating status (battery
condition)
Internal & external battery bars
Mute symbol
AC power port
Navigation controls
• +/- buttons
Press to adjust the pulse
setting (1, 2, 3 or 4).
• OK button
Press once to light up the
screen.
Press and hold down to display
the serial number and hours of
operation.
• Right/Left arrow buttons
Press once to light up the
screen.
Service personnel will also
use these buttons to access
maintenance menus for
troubleshooting.
Advertisement
Related Manuals for ResMed LifeChoice Activox
Summary of Contents for ResMed LifeChoice Activox
- Page 1 Distributed by: See ResMed.com for ResMed locations worldwide. Activox, LifeChoice and PULSE-WAVE are trademarks and/ 3500 Comsouth Drive, or registered trademarks of the ResMed family of companies. For patent information, see ResMed.com/ip. Product availability Suite 100 may vary across regions. Specifications may change without notice. © 2017 ResMed Ltd. 1019963/1 2017-06 Austin, TX 78744 USA ResMed.com...
- Page 2 Quick set up guide ResMed.com...
- Page 3 How to charge your POC Please ensure you fully charge the internal battery before using your device for the first time. If you purchased an external battery, it should also be fully charged before use. To charge the internal To charge the external A ‘Charging Internal’...
- Page 4 How to use your POC Turn on your POC by Press the + or – button to Plug in the nasal cannula briefly pressing and select the pulse setting then put the cannula releasing the power prescribed by your doctor. prongs into your nostrils button.The display screen The setting number (1-4)