Setting Up; Adjusting Depth - DAL-BO Ratoon Manual

The machine is supplied with factory settings, but fine adjustment will always
be required before use. Numerous adjustment options make it more flexible
and ensure maximum use.

Basic setting will ensure the machine will run horizontally. This is achieved
using the top bar. This basic setting is important to achieve an even field
surface and uniform working depth.

Adjusting depth

Set depth using the drilled plates (A) on wheels and using tractor lift arms.
Both sections of frame must be horizontal. If the machine is fitted with a
packer roller at the back, use this for setting depth rather than the wheels.
Page 14
Ratoon

Setting up

Fig. 2
A