Log On
Log Off
Register
Unregister
Applications Page Definitions
Applications/Programmable Key
Programmable Key
Format
Display Format
Show Display Name
from Server
BLF
Key Mode
Configures the event URL when users log on the phone successfully.
Configures the event URL when users log off the phone.
Configures the event URL when an account in the phone is registered
successfully.
Configures the event URL when an account in the phone is unregistered.
Configures the display format for the MPK. Users could select "Name",
"User ID" or "Name(User ID)". "Name" is the one saved in phone contacts.
The default setting is "Name, User ID, Key mode".
If selected, the display name on the server will replace the name users
configured.
The key modes are:
Speed Dial: Press to dial the UserID when the accounts being
configured as VPK.
Busy Lamp Field: Monitor the UserID status when the accounts
being configured as VPK.
Call Transfer: Transfer the current active call to UserID when the
accounts being configured as VPK.
Call Intercom: Intercom/paging to the UserID when the accounts
being configured as VPK.
Speed Dial via Active Account: Similar to Speed Dial but it will dial
based on the current active account. For example, if the phone is
offhook and account 2 is active, it will call the UserID when the
accounts being configured as VPK.
Dial DTMF: Dial the DTMF digits of the UserID when the accounts
being configured as VPK during the call.
Call Park: Configure the call park feature code to park or retrieve the
call.
Multicast Paging: For multicast sending, please fill in the display
name in the Settings and fill in the sending address in the multicast
GXV3380 Administration Guide
Version 1.0.1.19
P a g e
|
83