Grandstream Networks GXV3380 Administration Manual page 79

Config Provision
Download and Process
All Available Config
Files
Config Provision
PNP Feature
Enable PNP Feature
PNP URL
PnP(3CX) Auto
Provision
Advanced Settings
Disable SIP NOTIFY
Authentication
Validate Certification
Chain
Enable EEE Mode
mDNS Override Server
Factory Reset
proxy, transport protocol and server path. The default setting is "Yes".
By default, the device will provision the first available config in the order of
cfgMAC, cfgMAC.xml, cfgMODEL.xml, and cfg.xml (corresponding to
device specific, model specific, and global configs). If set to "Yes", the
device will download and apply (override) all available configs in the order
of cfgMAC, cfg.xml, cfgMODEL.xml ,cfgMAC.xml. Default is "No".
Device will download configuration files and provision by configured order.
Enables the PNP (Plug and Play) feature on the device. If it is enabled, the
device will be set as a provision server to send SIP NOTIFY message
including the provision URL to response the client phone's SIP
SUBSCRIBE request.
This feature will be enabled if the PNP URL is configured. If this setting is
enabled, the 3CX Auto provision will be disabled automatically.
Configures the URL to provision another client phone's config server path.
The URL will be included in the SIP NOTIFY message.
Sets the phone system to broadcast the SIP SUBSCRIBE message during
booting up to allow itself to be discovered and be configured by the SIP
platform. The default setting is "Yes".
Disables the SIP NOTIFY Authentication on the phone. If set to "Yes", the
phone will not challenge NOTIFY with 401. The default setting is "No".
Configures whether to validate the server certificate when download the
firmware/config file. If it is set to "Yes", the phone will download the
firmware/config file only from the legitimate server. Default setting is "No".
Configures enable/disable EEE (Energy-Efficient Ethernet) mode. If set to
"Yes", the phone will turn on the EEE mode. Note: Regardless of whether
the EEE mode is turned on or off, the network will reconnect. Default is
"No".
Sets the phone system to broadcast the Multicast DNS (mDNS) message
during booting up to allow itself to be discovered and be configured by the
SIP platform. If it is set to "User Type A', the phone system will broadcast
the MDNS message "A_grandstream-cfg.local"; if it is set to "Use Type
SRV", the MDNS message will be "SRV_grandstream-cfg.local".
The default setting is "Use Type A".
Resets the phone system to the default factory setting mode.
GXV3380 Administration Guide
Version 1.0.1.19
P a g e | 79