Defender 4K1T4B4 Manual page 19

TIME & DATE FORMAT
Select your time zone and date/time format. This is
used on the system and to date/time stamp
recorded footage.
STEPS:
Click the Time Zone drop-down and select
•
your zone.
Click the Date Format drop-down and select
•
12 or 24 hour.
Click the System Date calendar icon to select
•
the current date.
Click the System Time clock icon to select the
•
current Hour : Minute : Seconds using the up/down arrows to change the numbers.
Click Next to save your selections and to move to the next screen.
•
NETWORK CONNECTIONS
This screen shows the network connections for your
system when the DVR is connected to your
modem/router.
Changes are not required on the screen. Click Next
to move to the next screen.
MOBILE APP ACCESS
This screen controls the access for the Mobile App
to connect to the DVR.
STEPS:
Click the Enable checkbox to allow the app
•
to connect to the DVR.
Create a Verification Code.
•
required when adding the DVR in the Mobile
App.
Click Next to save your entries and to move
•
to the next screen.
This code is

18
CONTENTS