Dst Settings - Defender 4K1T4B4 Manual

14.1.2 DST Settings

Use this section to set the DVR to automatically adjust for daylight saving time (DST). Based on
these settings the system time will change at the start of DST and change back at the end.
1. Click the Auto DST Adjustment checkbox to have the DVR automatically adjust the system
time for DST based on the local DST rules.
your modem/router.
2. Click the Enable DST checkbox to have the DVR adjust the system time based on the
day/times entered.
3. Use the Month, Day #, Day drop-downs to select the Start (From)/End (To) time frames for
DST.
4. Click the Time fields to enter the start/end time for DST (time of day DST starts and ends).
5. Use the DST Bias drop-down to select the time difference or number of minutes/hours the
time should adjust for the start/end of DST.
6. Click Apply to save these settings.
This will only work if the DVR is connected to

51
CONTENTS