Defender 4K1T4B4 Manual page 26

START AUTO-SWITCH
When set the view will switch between cameras (channels). This option will only work when the Dwell
Time is setup in the Defender 4K Menu. See section
This will show the camera view for the selected amount of time before switching to the next camera,
like a slide-show.
START RECORDING
Select between Continuous and Motion Detection recording. This is the same feature that was set during
the Setup Wizard. When selected the system will record all day on all cameras based on your selection.
ADD IP CAMERA
IP Cameras are not available from Defender for the 4K system. To add an IP camera, follow the
direction provided with your camera.
PTZ CONTROL
PTZ Cameras are not available from Defender for the 4K system. Use the PTZ controls on-screen to
set up your camera.
OUTPUT MODE
Output Mode changes the appearance of the image on the screen. Click to select
between the options listed.
selected.
25
14.3.1 General for setting Dwell Times.
This changes the view for all cameras when

CONTENTS