Defender 4K1T4B4 Manual page 21

DVR HDD
This screen shows the details and status of the
hard drive installed in your DVR.
You can select Init to format the hard drive. This
will remove all exiting files from the hard drive.
Once the formatting process has started it cannot
be stopped and all files will be lost. The DVR hard
drive is pre-formatted and does not require
formatting during setup.
Changes are not required on this screen. Click
Next to move to the next screen.
NETWORK STATUS
This screen shows the details and status of the
modem/router connected to the DVR.
Changes are not required on this screen. Click
Next to move to the next screen.
RECORDING OPTIONS
Select how the DVR will record footage (Continuous
or Motion Detection). The system will record all day
based on the option selected on all cameras
(channels). You can change the recording schedule
at any time from the Defender 4K Menu.
STEPS:
Click the Continuous field and YES to
•
record all day on all cameras.
Click the Motion Detection field and YES to
•
record only when motion is detected all day
on all cameras.
Click OK to save your selection.
•
The Setup Wizard is complete, the Live View screen will open showing the feed from all connected
cameras.

20
CONTENTS