Camera Control Protocol Setting - ERNITEC Orion/3-DN Outdoor Installation & User's Instructions

2.5

Camera Control Protocol Setting

Define the protocol you are going to use basing on the devices of your
surveillance system. Generally, use one protocol even the devices are
provided from different manufacturers. Please refer to the table below for all
supported protocols with their matching switch numbers and baud rate and
choose a protocol for your Speed Dome Camera.
The table below shows various protocols with their matching switch numbers
and baud rate.
Switch No.
*Only function of Ernitec protocol is fully verified.
Select protocol: Pelco D, with switch no. 01 and baud rate 2400, for instance,
the protocol switch should be set as below.
Decimal Digit
14
Orion/3-DN Outdoor
Protocol
00 VCL
01 Pelco D
02 Pelco P
04 Chiper
05 Philips
06 Ernitec*
07 DSCP
08
AD422
09 DM P
11 Pelco D
12 Pelco D
13 Pelco P
14
Pelco P
15 JVC
21 Kalatel-485
22 Kalatel-422
Single Digit
NOTE: The number "0" should locate upwards as shown in above
diagram for correct switch definition.
Baud Rate
9600
2400
4800
9600
9600
2400
9600
4800
9600
4800
9600
2400
9600
9600
9600
4800