Glass - Sharp MX-M850 Manual

MAKING A COPY USING THE DOCUMENT GLASS
To make a copy of a book or other thick original that cannot be scanned with the automatic document feeder, open the
automatic document feeder and place the original on the document glass. This section explains how to make a copy
(1-sided copy of a 1-sided original) using the document glass.
1
Exposure
Auto
2
Copy Ratio
100%
Depending on the size of the placed original, there may be cases where the same size of paper as the original is not
selected automatically. In this event, change the paper size manually.
Plain
Plain
Plain
8½x11
5.
11x17
1. 2. 6.
8½x11 8½x11 11x17
3. 11x17 7.
4. 8½x14 11x17
Original Paper Select
Auto
Auto
8½x11
8½x11
Plain
Open the automatic document feeder,
place the original face down on the
document glass, and then gently close
the automatic document feeder.
Document glass scale
5-1/2" x 8-1/2"
8-1/2" x 11" (A4)
• Align the corner of the original with the tip of the arrow mark
on the document glass scale.
• Place the original in the appropriate position for its size as
shown above.
Check the paper to be used.
Special Modes
Make sure that the desired paper (tray) is selected.
2-Sided Copy
To change the paper (tray), touch the [Paper Select] key.
☞
Output
PAPER TRAYS
File
Quick File
17
Document glass scale
mark
(A5)
B5
(page 14)
mark
B5R
8-1/2" x 11"R (A4R)
8-1/2" x 14" (B4)
11" x 17" (A3)