Sharp MX-M850 Manual page 46

Press the [START] key (
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you
have selected sort mode, change originals and press the [START] key (
4
then touch the [Read-End] key.
To cancel scanning of the original and copying...
Press the [STOP] key (
Rotation copy cannot be used in combination with margin shift.
To cancel the margin shift setting...
Touch the [Cancel] key in the screen of step 3.
System Settings (Administrator): Initial Margin Shift Setting
The default margin shift setting can be set from 0" to 1" (0 mm to 20 mm). The factory default setting is 1/2" (10 mm).
).
).
46
). Repeat until all pages have been scanned and