Basic Procedure For Making Copies; Making Copies; Using The Automatic Document Feeder To Make Copies - Sharp MX-M850 Manual

BASIC PROCEDURE FOR
2

MAKING COPIES

This chapter explains the basic procedures for making copies, including selection of the copy ratio and other copy
settings.
MAKING COPIES
USING THE AUTOMATIC DOCUMENT FEEDER TO
MAKE COPIES
This section explains how to make copies (1-sided copies of 1-sided originals) using the automatic document feeder.
Indicator
line
1
Exposure
Auto
2
Copy Ratio
100%
Depending on the size of the placed original, there may be cases where the same size of paper as the original is not
selected automatically. In this event, change the paper size manually.
Plain
Plain
Plain
8½x11
5.
11x17
2.
1. 6.
8½x11 8½x11 11x17
11x17
3. 7.
8½x14 11x17
4.
Original Paper Select
Auto
Auto
8½x11
8½x11
Plain
Place the originals face up in the
document feeder tray with the edges
aligned evenly.
Insert the originals all the way into the document feeder tray.
Multiple originals can be placed in the document feeder tray.
The stack of originals must not be higher than the indicator line
on the tray.
Check the paper to be used.
Special Modes
Make sure that the desired paper (tray) is selected.
2-Sided Copy
To change the paper (tray), touch the [Paper Select] key.
☞
Output
PAPER TRAYS
File
Quick File
15
(page 14)