Inserting Covers In Copies; Settings - Sharp MX-M850 Manual

INSERTING COVERS IN COPIES (Cover Settings)
A different type of paper can be inserted at the positions corresponding to the front and back covers of a copy job.
This is useful for arranging documents in an attractive format and for using a different type of paper as a cover on an
estimate sheet or similar document.
Covers can be used in combination with inserts.
Copying on a front cover and inserting together with a back cover
AAA
1 2
Front cover paper
Indicator
line
1
The document glass cannot be used.
Select the special modes.
(1) Touch the [Special Modes] key.
2
(2) Touch the [Covers/Inserts] key.
☞
SPECIAL MODES
Special Modes
Covers/Inserts
Cover Setting
Front
3
Cover
Back
Cover
3 4
Originals
(page 43)
Cancel
Inserts Setting
Insertion
Type A
Insertion

Settings

Insertion
Type B
Page Layout
Tray Settings
5
Back cover paper
Insert the originals face up in the
document feeder tray.
Insert the originals all the way into the document feeder tray.
Multiple originals can be placed in the document feeder tray.
The stack of originals must not be higher than the indicator line
on the tray.
Touch the [Front Cover] key.
OK
OK
60
Front cover
Back cover
Copies