Analog Trim Meter; Analog Trim Meter Applications; Analog Trim Meter Dimensions; Trim Sensor Adjustment - Yamaha F70AET Rigging Manual

ANALOG TRIM METER

The trim meter shows the trim angle of the outboard motor.

ANALOG TRIM METER APPLICATIONS

Ref. No. Description
4-pin coupler
BLK panel
1
Bullet connector
BLK panel
4-pin coupler
WHT panel
2
Bullet connector
WHT panel

ANALOG TRIM METER DIMENSIONS

With 4-pin coupler
46.6 (1.83)
11 (0.43)

TRIM SENSOR ADJUSTMENT

For a down position adjustment, loosen the trim sensor screw and make an adjustment so that the
needle aligns with the marking line indicating "DOWN".
1
mm (in.)
200 (7.87)
200 (7.87)
Y
L
B
B
x
x
13.7
(0.54)
2
Part No.
Above premixed 40 (3-cyl) w/ PTT, 250G/
6Y7-83670-00
L250G
Above 40 (3-cyl) w/ oil injection & PTT (except
6Y7-83670-40 250G/L250G), Above F30 w/ PTT
Using as a set with tachometer, 6Y7-83540-80
6Y7-83670-20 Premixed 40 (3-cyl)-225 w/ PTT, 250G/L250G
Above 40 (3-cyl) w/ oil injection & PTT (except
6Y7-83670-50 250G/L250G), Above F30 w/ PTT
Using as a set with tachometer, 6Y7-83540-90
With bullet connector
B
P
46.6 (1.83)
11 (0.43)
5-18
Applicable model
(*1)
, T25
(*1)
, T25
(*1) Mechanical RC
(*2) T25 for US/CA
mm (in.)
300 (11.8)
200 (7.87)
200 (7.87)
Y
B
B
P
13.7
(0.54)
(*2)
(*2)
L