Yamaha F70AET Rigging Manual page 213

RIGGING GROMMET DESCRIPTION
F200, F225, F250 (V6-3.3L) w/ Variable Camshaft Timing
[Mechanical RC]
10-pin main harness
Flushing hose ( Market OP)
F200, F225, F250, F275 VMAX (SHO) and F150, F165, F175, F200(L4-2.8L)
Coolant temp. wire/
pressure tube (OP)
(for conventional gauge)
10-pin main wire-harness
Speed hose
Shift cable
Gauge wire-harness
or Pigtail bus wire
F200 (L4-2.8L), F225, F250, F300 (V6-4.2L) [DEC]
16-pin main wire-harness
Isolator cable (OP)
Speed hose
Throttle cable
Shift cable
Speed hose
Throttle cable
Battery cable
Fuel hose
Battery cable
Coolant temp. lead and/or
Coolant press. tube (OP)
Isolator cable (OP)
Battery cable
Gauge harness
Fuel hose
Fuel hose
M6 bolt: 8 Nm, 0.8 kgf·m, 13 ft·lb
Flushing hose (market OP)
M6 bolt: 8 Nm, 0.8 kgf·m, 13 ft·lb
Flushing hose (market OP)
5-49
Position the hose clip
end as shown
Position the hose clip
end as shown