Coolant Press. Attachment And/Or Coolant Temp - Yamaha F70AET Rigging Manual

COOLANT TEMP. METER
COOLANT PRESS. ATTACHMENT AND/OR COOLANT TEMP. SENSOR
INSTALLATION (FOR 2-STROKE MODELS)
Remove the screw plug (1) from the cylinder
head and install the sensor/attachment (2) with
a new gasket.
After installing the sensor/attachment, check
for water leakage.
Tightening torque
Sensor/attachment (M14)
40V, 50H
E48C, 55B
60F, 70B
N•m kgf•m ft•lb
20 2.0 15
(2)
(1)
(1)
(2)
(1)
(2)
75C, 90A, 75A, 85A
V4, V6
(2) Coolant temp. sensor
(1)
NOTICE
Install the coolant pressure attachment on
the port side. If it is installed on the star-
board side, the tube could cause damage
by hard bending.
5-21
(1)
(2)
(2) Coolant press. attachment
(1)