Technical Features - Bartscher Master 900 Series Installation, Use And Maintenance Manual

WARNINGS
General
• Read the instructions carefully before installation, use and maintenance of the appliance.
• Installation must be carried out by qualified personnel following the manufacturer's instructions
in the specific manual.
• The appliance must only be used by trained personnel and only for its intended use.
• In the event of breakdown or malfunctioning, switch off the appliance and call in after sales
assistance only from an authorised centre.
• Use only original spare parts; otherwise no liability is accepted by the manufacturer.
• The appliance must not be washed with high- pressure water sprays, neither must the openings
or air fumes on heat inlets/outlet s be blocked.
ATTENTION! The manufacturer declines any liability for damage caused by wrong
installation, tampering, making unauthorised changes, improper use, poor maintenance,
installation of non-original spare parts, not observing local norms, incorrect use or not
observing the instructions in this booklet
For the installer
• The functioning of the appliance must be explained and shown to the user. After having ensured
that everything is clear, the instruction booklet must be handed over.
• The user must be informed that any building modification or restructuring that may in any way
modify the air supply necessary for combustion, makes it necessary to carry out another check of
the functionality of the appliance.
The following instructions for set up and functioning refer to gas and mixed appliances belonging to
categories I , II
3B/P 2H3+
(G30- G31) of 30/37 mbar, for Methane (G20- G25- G25.1) of 20/25 mbar, and for Town Gases
(G110-120) of 8mbar. The data plate (fig. 5 – pag.4) with all the information to refer to regarding
the appliance, is situated inside the right or left side of the control panel, depending on the model.
The appliances have been checked in accordance with the European directives below.
2006/95/CE - Low Tension (LVD)
CEE 2004/108 - Electromagnetic Compatibility (EMC)
90/396/EEC - Gas Appliances
98/37/EC - Appliance to the directives
and the particular reference norms.

TECHNICAL FEATURES

, II , II , III
2H3B/P 2HS3B/P
with a power pressure for Buthane/Propane
1ab2H3B/P
Pag. 34/55