Advertisement
INTRODUCTION
Rafale
Rafale
Rafale
Rafale
The
is a famous French delta fighter built by Dassault Aviation.
You love very big models, you love fighter, you love agile and aerobatic jets, you love power :
Rafale e e e
Rafal
Rafal
Rafal
The 1/5
is for you.
Rafale
Rafale
Rafale
Rafale
The
model is really incredible in flight. It is a very big models, very aerobatic with good
roll rate and incredible high angle of attack possibility. Flight is very realistic and impressive with
big turbine sound and afterburner lights.
Rafale
Rafale
Rafale
Rafale
The
from AVIATION DESIGN is fully CAD designed. All the plug parts were CNC
machined.. It is a scale model, with all the panel lines and rivets engraved in the fuselage.
It contains many scale details, (gears, hinges, cockpit...). It is available in single seat version or in
twin seat version.
Rafale
Rafale
Rafale
Rafale
The
is designed for either a single high thrust (30 kg) jet engine or twin standard turbine
(2x16 kg). It incorporates special inlets and ducting for both version.
Rafale
Rafale
Rafale
Rafale
Of course the
all bulkeads are glued, all control surfaces are hinged. No important gluing are required.
The special landing gear was designed for strong operation (grass airfield). It is CNC machined,
will aluminum gear box and steel oleo legs. The full airframe is carbon reinforced with strong
plywood gear support to accept without trouble ''bad landing''.
We also designed a specific front landing gear for the Navy version. This front gear is fully CNC
machined with special cinematic for scale operation. The front fuselage structure is also specific
for Navy version (only single seat)
The model has plug in wings and fin for transportation
Rafale
Rafale
Rafale
Rafale
The
has a removable nose cone and a large canopy for an easy access to radio.
The large fuselage hatch gives also an excellent access to the turbine, fuel system and tailpipe.
KIT FEATURES :
• High quality, grey gel-coated epoxy-glass fuselage. All the panel lines are engraved. The
fuselage is in 2 parts for an easier building.
• All the plywood formers and the necessary wood are already glued in fuselage.
• Nose cone in fiber.
• 2 Exhaust nozzles in fiber.
• Canopy frame in 2 parts in fiber for Rafale C single seater version or Rafale B twin seater
version.
•
Access hatch requiring no framework for single seat version or twin seat version.
• 2 Epoxy-glass inlets. Ductings are designed and specific for single turbine or twin turbine
• 2 Wings molded in epoxy under vacuum with carbon reinforcement, aluminum and carbon
tube fitted.
• Fully molded composite fin with carbon tube fitted.
is fully molded in composite, and pre assembled : model is painted in mold,
2
Advertisement
